Every Shadowspec umbrella range is built around proprietary engineered mechanisms. Each one solves a specific problem for outdoor spaces in the Malaysian climate. 

Below is a specification-level look at what each mechanism does, and which Shadowspec ranges use it. 

Shared across Serenity™, Unity™, and Retreat™

SHADOWLIFT™ - gas assisted lift

Shadowspec Shadowlift™ mechanism

SHADOWLIFT™ uses gas-assisted deployment to raise the canopy with minimal effort. It is fitted across the Serenity™, Unity™, and Retreat™ ranges. 

  • Gas-assisted, low-effort deployment 
  • Fitted on Serenity™, Unity™, and Retreat™ umbrellas.
  • Reduces manual force needed to open 

 

Serenity™ and Unity™ cantilever mechanisms 

SHADOWGLIDE™ - smooth one-movement deployment 

Shadowspec Shadowglide mechanism used in cantilever umbrellas

SHADOWGLIDE™ is the one-movement slider mechanism used across the Serenity™ and Unity™ cantilever ranges. It opens or closes the canopy in around five seconds, with no winding or cables. 

  • Opens or closes in about five seconds 
  • No winding or cables 
  • Fitted on Serenity™ and Unity™ umbrellas

 

SHADOWHUB™ - integrated smart lighting 

Shadowspec Shadowhub smart LED light technology built in and app controlled

SHADOWHUB™ is the built-in LED lighting system on Serenity™ and Unity™ umbrellas, controlled through a smartphone app. It can run on a smart battery or a hardwired kit. 

  • App-controlled LED lighting 
  • Smart battery or hardwired kit options 
  • Extends outdoor use after sunset

SHADOWLOCK™ - integrated security and wind protection 

Shadowlock mechanism for Shadowspec Unity umbrella

SHADOWLOCK™ is the integrated security and wind protection system built into the Serenity™ and Unity™ rotation mechanism, supporting full 360-degree follow-the-sun rotation. 

  • Integrated security and wind protection 
  • Supports full 360° rotation 
  • Standard on Serenity™ and Unity™ umbrellas

Retreat™ wall-mounted mechanisms 

SHADOWROLL™ - integrated roller deployment 

Shadowspec Shadowroll integrated roller allows smooth deployment

SHADOWROLL™ is the integrated roller system on Retreat™ umbrellas that allows smooth canopy deployment from a wall-mounted position. 

  • Smooths canopy deployment action 
  • Built into the Retreat™ wall bracket 
  • Suited to compact mounting positions

SHADOWREACH™ - extended shade reach 

Shadowspec Shadowreach extend for maximum shade reach

SHADOWREACH™ extends the Retreat™ canopy outward from the wall bracket, increasing shade coverage without a floor-standing base. 

  • Extends shade without a floor base 
  • Increases usable coverage area 
  • Fitted on the Retreat™ range

SHADOWTILT™ - sun-angle tilt 

Shadowspec Shadowtilt protects from low angled sun rays

SHADOWTILT™ gives Retreat™ two tilt positions, protecting against low-angle sun common in Malaysia during early morning and late afternoon. 

  • Two tilt positions for low-angle sun 
  • Protects morning and evening seating areas 
  • Fitted on the Retreat™ range

Oasis™ market umbrella mechanisms 

SHADOWPUSH™ - secure pin-free deployment 

Shadowspec Shadowpush safe and secure no more pins

SHADOWPUSH™ is a pin-free deployment mechanism on the Oasis™ 2.0m and 2.7m sizes, removing a common pinch and trip hazard on busy hospitality floors. 

  • No pins to align or lose 
  • Fitted on Oasis™ 2.0m and 2.7m 
  • Faster, safer daily deployment 

SHADOWPOP™ - tension-assisted lift 

Shadowspec Shadowpop tension assisted lift no ropes and no tangles

SHADOWPOP™ gives the Oasis™ 2.0m and 2.7m sizes a tension-assisted lift, with no ropes to tangle during opening. 

  • Tension-assisted, low-effort lift 
  • No ropes to tangle or replace 
  • Fitted on Oasis™ 2.0m and 2.7m 

SHADOWCLEAT™ - dual-cleat cord security 

Shadowspec Shadowcleat dual-cleat to keep the cord safe and secure

SHADOWCLEAT™ is a dual-cleat system on the larger Oasis™ 3.0m and 4.0m sizes that keeps the deployment cord secure between uses. 

  • Keeps deployment cord secure 
  • Fitted on Oasis™ 3.0m and 4.0m 
  • Reduces cord wear and tangling

SHADOWBLOCK™ - dynamic double pulley system 

Shadowspec Shadowblock dynamic double pulley system

SHADOWBLOCK™ is a dynamic double pulley system fitted to the Oasis™ 3.0m and 4.0m sizes, built for the higher load of a larger canopy. 

  • Dynamic double pulley system 
  • Built for larger canopy loads 
  • Fitted on Oasis™ 3.0m and 4.0m

Summary of each mechanism by umbrella type

Mechanism Oasis™ Retreat™ Serenity™ Unity™
SHADOWLIFT™ - Yes Yes Yes
SHADOWGLIDE™ - - Yes Yes
SHADOWHUB™ - - Yes Yes
SHADOWLOCK™ - - Yes Yes
SHADOWROLL™ - Yes - -
SHADOWREACH™ - Yes - -
SHADOWTILT™ - Yes - -
SHADOWPUSH™ 2.0m / 2.7m - - -
SHADOWPOP™ 2.0m / 2.7m - - -
SHADOWCLEAT™ 3.0m / 4.0m - - -
SHADOWBLOCK™ 3.0m / 4.0m - - -

Specify with confidence 

For full technical specifications, download the range-specific specification sheet, or request a quote from our team. 

Refer to Trademark and Attribution page for ownership of Trademarks listed.